New board for china CO2 laser with parallel port.
This new generation board, replaced the original, allows you to run the machine through MACH 3 replacing Moshidraw which is unreliable. You can run cuts through Gcode and engraving with low resolution photos.
Totally plug and play (does not require modification or welding )
Parallel port (DB25)
Full compatibility with MACH 3
Possibility to perform cutting (in this version the laser power is not controlled via Gcode)
Ability to perform engraving of low resolution photos with Mach3 plugin (jpg, bmp, png) without prior elaboration of the image.
Maximum engraving speed: 3000 mm / min
Maximum movement speed: 6000 mm / min
You can easily download from the download section of FeelCNC web page the configuration files for MACH 3, the user manual for installation, configuration and use.
Connect your CNC machine to the PC using the USB!
The i-USB CNC is a board designed to connect your CNC machines to the PC using the USB port. Born from the magnificent project of MK1 Planet CNC (http://www.planet-cnc.com), this card boasts a complete isolation between the PC and the CNC machine, greatly reducing electrical interference that may cause instability in some cases .
Motor output DB25
completely optically isolated
Fully Plug & Play for our R-Lasenh (engraving function is only compatible with Mach3 )
Software compatible USB CNC Controller of Planet CNC
Please note that the software license is sold separately, directly available from the manufacturer PLANET CNC (http://www.planet-cnc.com)
LasersaurJR kit is the perfect introduction to the world of Open Source.
LasersaurJR is a board created by the project Lasersaur (http://labs.nortd.com/lasersaur/). With this card you will simply have to make cuts to the laser uploading your files SVG and DXF from the web software LaserApp specially modified to run on all Chinese laser.
Plug and Play
possibility of cuts from DXF SVG
full web interface with modified software LaserApp
MOTOR CONTROLLER NOT INCLUDED!